Duerkopp Adler 367 Instructions d'exploitation télécharger pdf (Page 12)

6.5 Winding on the looper thread

–

Pull the thread through the guide 3 and the tensioner 4.

–

Place the thread behind the blade 5 and sever it.

–

Fit the bobbin 1 onto the bobbin winder.

Hint

There is no need to wind the thread onto the bobbin by hand.

–

Press the bobbin-winder lever 2 into the bobbin.

–

Sewing

The bobbin-winder lever terminates the process as soon as the

bobbin is full.

The bobbin winder always stops in such a position that the blade 5

is in the insertion position (see r ight-hand illustration).

–

Remove the full bobbin 1, place the thread behind the blade 5 and

sever it.

–

Fit empty bobbin onto the bobbin winder for the next winding

process and press the bobbin-winder lever 2 into the bobbin.

CAUTION !

If the thread is not to be wound on during sewing, it is essential

for the sewing foot to be locked in the raised position and the

sewing-foot stroke set to the smallest value.

4321

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 38 39

Pas de commentaire

Duerkopp Adler 367 Instructions d'exploitation Page 12